1. Function
Sand blasting tank is the core part of sand blasting system. Its
performance directly affects whether the sand blasting system is
normal, efficient. The working principle of the sand blasting tank
is pressure type: The tank can work with multiple abrasive control
valve at the same time, while high speed spray gun work.It has a
high degree of automation and high working efficiency.
2. Performance characteristics
| Push-in work, high working pressure (0.6-0.8MPa), strong spray
force, high efficiency. |
| Start fast, close the gun sensitive. |
| Wheeled structure, easy to move. |
| Small size, easy to add sand, suitable for single operation. |
| Using the United States advanced sand valve structure, can
accurately adjust the size of sand and air pressure. |
| The use of standardized pressure vessel manufacturing standards, in
line with national, industry norms, safe and reliable. |
| Equipped with wear-resistant sandblasting pipe and nozzle, to
ensure a long time normal operation. |
| Simple operation, easy maintenance, maintenance, low cost of use. |
| Sand, dust, dirt and other automatic recovery of more than 95%, no
dust pollution and sand splash, to meet environmental requirements,
sand, dust and impurities to filter their own separation, sand
recycling to achieve recycling; mobile flexible, reliable
performance, failure Low reliability, unique and advanced gas
control, easy operation and maintenance, clean the working
environment, is conducive to the health of the staff. |
3. Instructions
| 1. Wear a protective helmet |
| 2. Close the exhaust switch and drain switch, the screen of the
abrasive added to the tank (preferably not higher than the tank,
otherwise it will affect the life of the closed valve); |
| 3. Open the intake valve, with both hands to hold the blasting pipe
gun nozzle connector one end, not the muzzle on the people; |
| 4. Press the remote control switch to adjust the size of the sand
and gas |
| 5. Host work in a high-pressure state, not free to move; |
| 6. The use of the equipment pressure can not exceed 0.8Mpa; |
4. Spare List (Single Spray Lance)
| 1 | Manual Valve x 1 |
| 2 | Ball Valve x 3 |
| 3 | Oily Water Separator x 1 |
| 4 | Cross x 1 |
| 5 | Silencer x 1 |
| 6 | Union x 3 |
| 7 | Clamp x 3 |
| 8 | Quick Coupling x 2 |
| 9 | Nozzle x 1 |
| 10 | Reflux Valve x 1 |
| 11 | Rubber hose for sand and grit blasting x 1 |
5. Packing & Delivery
Plywood packing or packing as clients' request.
6. Application
(A) workpiece coating, workpiece bonding pretreatment
Sandblasting can remove all dirt from the surface of the workpiece
and build a very important base pattern on the surface of the
workpiece (that is, the so-called hair surface), and can exchange
different sizes of abrasives to achieve varying degrees of
roughness Degree, greatly improve the workpiece and paint, plating
the bonding force. Or make the adhesive bonding more solid, better
quality.
(2) casting and forging surface, heat treatment after the workpiece
cleaning and polishing
Sandblasting can clean up the casting and forging, heat treatment
after the workpiece surface of all dirt (such as oxide, oil and
other residues), and the workpiece surface polishing to improve the
smoothness of the workpiece, play a role in beautifying the
workpiece.
Blasting can make the workpiece exposed to uniform metal color, so
that the appearance of the workpiece more beautiful, to beautify
the decorative effect.
(3) machined parts burr cleaning and surface beautification
Blasting can clean up the surface of the tiny burrs on the surface
of the workpiece and make the surface of the workpiece even more
flat, eliminating the burrs and improving the grade of the
workpiece. And Yoshikawa sandblasting machine sandblasting at the
junction of the workpiece surface to play a small rounded, so that
the workpiece is more beautiful, more sophisticated.
(D) to improve the mechanical properties of parts
After the blasting of the mechanical parts, the surface of the
parts can produce uniform fine and concave surface (basic pattern),
so that the oil is stored, so that the lubrication conditions
improved and reduce noise to improve the mechanical life.
7. Details
